RUST REMOVER-IMMERSION

Model No : 4001

Sometimes rust area is hard to be reached, sometimes other methods like sandblasting or grinding need special skills to be done and sometimes you just need easier way to remove the rust. In this situation, having a solution which you can remove your rusted area by immersing your part/piece will be an easier approach. 

One of usages of this is when you want to prepare your surface for painting/coating.

Features:

  • Removes heavy, medium and light rust

  • Reusable

  • Metal surface restoration

  • Solvent free

  • Water based and biodegradable formula

  • Non-toxic, non-corrosive, non-flammable

  • No fumes or bad odors

  • Safe on plastic, metal, Viton and most paints

Precaution:

  • Harmful if swallowed.

  • Irritant to eye

  • Keep out of each of children

  • Use gloves to protect sensitive skins

  • Immediately flush the contacted eye with water

Directions:

For heavy rusts

 Immerse your rusted part into Rust Remover solution in non-metal container and wait for 2 hours then rinse your part with water. If your part is still rusty,  repeat this application.

For medium rusts

This period can be reduced to 60 minutes.

For light rusts

This period can be reduced to 30 minutes.

Note:

To reduce the application time, in middle of the process you can take your part out of the container and wash the rusted surface to remove dissolved rusts and put it again to the container to help the process.

Packing: 3.78, 20 Liter

Copyright © NEWLISH